Home - News - Details

The Main Classification Of Disc Plows

The disc plough can be divided into two large sizes: ordinary type and vertical type according to the disc installation mode. The disk rotation plane of the ordinary disc plough and the vertical disc plough has a 10° to 30° deflection angle between the disk rotation plane and the forward direction, which plays a role in pushing the soil and enhancing the ability of the disc to enter the soil. The rotation plane of the ordinary disc plough is not perpendicular to the ground, but slightly inclined, and there is an angle between the rotary plane and the ground plumb line called the inclination, generally about 30 ° ~ 45 °. A normal disc plough with an inclination angle whose declination angle is indicated by the sharp angle between the horizontal diameter of the disc and the forward directional line. It makes it easy to cut the disc and lift it up and flip it. Disc plows generally install molders on the rear of the disc concave surfaces to prevent soil adhesion. The surface of the molder also has the function of assisting in the turning.

The disc slewing surface of the vertical disc plow is perpendicular to the surface of the ground, with only a declination angle and no inclination. The disc of the vertical disc plough is small, and the number of discs on a plough is large (the number of discs of a large vertical disc plough can reach 30 to 40 pieces), which is mainly used for shallow ploughing and stubble eradication. It can also be equipped with a seed box and a fertilization box for joint ploughing, sowing and fertilization.

Ordinary disc plows also have two-way disc plows that can be flipped left or right. The beam on which the plough post is installed can swing horizontally from side to side relative to the plough frame to accommodate the commutation of the disc. The reversing control mechanism is mechanical or hydraulic. The two-way disc plow allows the mounds to be flipped to one side of the field at all times, and the surface is flat after ploughing, leaving no ditches.

Driven disc plough was developed in some countries in the 1980s, driven by the tractor power output shaft to drive the set of discs, so that it rotates at a speed of about 120 rpm , turning and crushing soil effect is better, used for ploughing wet land, rice stubble land can better use tractor power.


Send Inquiry

You Might Also Like