Home - Knowledge - Details

The role of micro-cultivators

1: Lubrication and wear reduction

There is a rapid relative sliding between the piston and the cylinder, between the spindle and the pad, and to prevent the part from wearing out too quickly, an oil film needs to be established between the two sliding surfaces. There is a sufficient thickness of the oil film to separate the relatively sliding parts surface, so as to achieve the purpose of reducing wear.

2: Cooling and cooling

The oil brings heat back to the tank and dissipates it into the air to help cool the engine.

3: Wash and clean

Good oil can bring carbides, sludge and wear metal particles on engine parts back to the oil tank through circulation, and through the flow of lubricating oil, rinse the dirt generated on the working surface of the parts.

4: Sealed and leak-proof

The oil can form a sealing ring between the piston ring and the piston, reducing gas leakage and preventing the ingress of external contaminants.

5: Anti-rust and anti-corrosion

The lubricating oil can be adsorbed on the surface of the parts, preventing water, air, acids and harmful gases from coming into contact with the parts.

6: Vibration damping buffer

When the pressure of the engine cylinder port rises sharply, the load on the piston, piston chips, connecting rods and crankshaft bearings is suddenly aggravated, and this load is lubricated by the bearing, so that the impact load is buffered.


Send Inquiry

You Might Also Like