Maintenance Problems Of Micro-cultivators

Since the environment in which the micro-cultivator works is harsh, maintenance is particularly important. In the work of the micro-cultivator, due to the vibration of the parts rubbing against each other, the invasion of oil, mud and water, it is inevitable to cause the wear of the parts; The connection is loose, corrosion aging. As a result, the technical state of the micro-cultivator becomes worse, the power decreases, the fuel consumption increases, the wear is accelerated, and the failure continues to appear. In order to prevent the occurrence of the above situation, it is necessary to strictly implement the maintenance system of "prevention is more important than treatment, and maintenance is more important than repair".

Maintenance must be carried out in strict accordance with the cycle and content of maintenance. Liu Yongzhong of Jinzhu Village, a sub-township, reflected that his machine was weak, burning oil, starting difficulty, disassembling and inspecting: the oil in the engine gearbox has become muddy, and lubrication is difficult; The radiator vents of the engine are all blocked, and the heat dissipation effect is poor; Cylinder liners, pistons are severely worn, lack of power. Typical failures caused by inadequate maintenance.